dmesg - Western Digital WD800JD-75MS

Return To Western Digital WD800JD-75MS System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-23-generic (buildd@phianna) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #31-Ubuntu SMP Tue Oct 21 17:56:17 UTC 2014 (Ubuntu 3.16.0-23.31-generic 3.16.4)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
Atom PSE erratum detected, BIOS microcode update recommended
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f524fff] usable
BIOS-e820: [mem 0x000000007f525000-0x000000007f52cfff] reserved
BIOS-e820: [mem 0x000000007f52d000-0x000000007f5bcfff] usable
BIOS-e820: [mem 0x000000007f5bd000-0x000000007f5c0fff] reserved
BIOS-e820: [mem 0x000000007f5c1000-0x000000007f65ffff] usable
BIOS-e820: [mem 0x000000007f660000-0x000000007f6effff] ACPI NVS
BIOS-e820: [mem 0x000000007f6f0000-0x000000007f6f2fff] usable
BIOS-e820: [mem 0x000000007f6f3000-0x000000007f6fefff] ACPI data
BIOS-e820: [mem 0x000000007f6ff000-0x000000007f6fffff] usable
BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI:                  /D945GCLF, BIOS LF94510J.86A.0067.2008.0619.1959 06/19/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x7f700 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-E0FFF write-protect
  E1000-E7FFF uncachable
  E8000-E8FFF write-protect
  E9000-EFFFF uncachable
  F0000-F0FFF write-protect
  F1000-F7FFF uncachable
  F8000-F8FFF write-protect
  F9000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000 mask 080000000 write-back
  1 base 07F800000 mask 0FF800000 uncachable
  2 base 07F700000 mask 0FFF00000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2040MB, range: 8MB, type UC
reg 2, base: 2039MB, range: 1MB, type UC
total RAM covered: 2039M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000089000] 89000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x7f200000-0x7f3fffff]
 [mem 0x7f200000-0x7f3fffff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7f1fffff]
 [mem 0x7c000000-0x7f1fffff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x7bffffff]
 [mem 0x00100000-0x7bffffff] page 4k
init_memory_mapping: [mem 0x7f400000-0x7f524fff]
 [mem 0x7f400000-0x7f524fff] page 4k
init_memory_mapping: [mem 0x7f52d000-0x7f5bcfff]
 [mem 0x7f52d000-0x7f5bcfff] page 4k
init_memory_mapping: [mem 0x7f5c1000-0x7f65ffff]
 [mem 0x7f5c1000-0x7f65ffff] page 4k
init_memory_mapping: [mem 0x7f6f0000-0x7f6f2fff]
 [mem 0x7f6f0000-0x7f6f2fff] page 4k
init_memory_mapping: [mem 0x7f6ff000-0x7f6fffff]
 [mem 0x7f6ff000-0x7f6fffff] page 4k
RAMDISK: [mem 0x348a0000-0x36447fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000014 (v00 INTEL )
ACPI: RSDT 0x000000007F6FD038 000038 (v01 INTEL  D945GLF  00000043      01000013)
ACPI: FACP 0x000000007F6FC000 000074 (v01 INTEL  D945GLF  00000043 MSFT 01000013)
ACPI: DSDT 0x000000007F6F7000 00477C (v01 INTEL  D945GLF  00000043 MSFT 01000013)
ACPI: FACS 0x000000007F6A3000 000040
ACPI: APIC 0x000000007F6F6000 000078 (v01 INTEL  D945GLF  00000043 MSFT 01000013)
ACPI: WDDT 0x000000007F6F5000 000040 (v01 INTEL  D945GLF  00000043 MSFT 01000013)
ACPI: MCFG 0x000000007F6F4000 00003C (v01 INTEL  D945GLF  00000043 MSFT 01000013)
ACPI: ASF! 0x000000007F6F3000 0000A6 (v32 INTEL  D945GLF  00000043 MSFT 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007f6fffff]
Initmem setup node 0 [mem 0x00000000-0x7f6fffff]
  NODE_DATA [mem 0x7f65b000-0x7f65ffff]
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0008efff]
  node   0: [mem 0x00100000-0x7f524fff]
  node   0: [mem 0x7f52d000-0x7f5bcfff]
  node   0: [mem 0x7f5c1000-0x7f65ffff]
  node   0: [mem 0x7f6f0000-0x7f6f2fff]
  node   0: [mem 0x7f6ff000-0x7f6fffff]
On node 0 totalpages: 521702
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3982 pages, LIFO batch:0
  DMA32 zone: 8092 pages used for memmap
  DMA32 zone: 517720 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0008f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7f525000-0x7f52cfff]
PM: Registered nosave memory: [mem 0x7f5bd000-0x7f5c0fff]
PM: Registered nosave memory: [mem 0x7f660000-0x7f6effff]
PM: Registered nosave memory: [mem 0x7f6f3000-0x7f6fefff]
e820: [mem 0x80000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88007ee00000 s87360 r8192 d23232 u524288
pcpu-alloc: s87360 r8192 d23232 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513525
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2004544K/2086808K available (7731K kernel code, 1200K rwdata, 3608K rodata, 1360K init, 1308K bss, 82264K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:712 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 1596.196 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.39 BogoMIPS (lpj=6384784)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Atom PSE erratum detected, BIOS microcode update recommended
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e82000 - ffffffff81e8a000)
ftrace: allocating 29288 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) CPU  230   @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
Atom PSE erratum detected, BIOS microcode update recommended
Disabled fast string operations
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (6384.78 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7f660000-0x7f6effff] (589824 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 21:42:43, date: 10/26/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xf0000000]
pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90200000-0x9027ffff]
pci 0000:00:02.0: reg 0x14: [io  0x20e0-0x20e7]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0x90280000-0x902bffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x902c0000-0x902c3fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x2080-0x209f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x2060-0x207f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x2040-0x205f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0x2020-0x203f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0x902c4000-0x902c43ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: can't claim BAR 13 [io  0x0400-0x047f]: address conflict with ACPI CPU throttle [io  0x0410-0x0415]
pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io  0x20d8-0x20df]
pci 0000:00:1f.1: reg 0x14: [io  0x20f4-0x20f7]
pci 0000:00:1f.1: reg 0x18: [io  0x20d0-0x20d7]
pci 0000:00:1f.1: reg 0x1c: [io  0x20f0-0x20f3]
pci 0000:00:1f.1: reg 0x20: [io  0x20b0-0x20bf]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0x20c8-0x20cf]
pci 0000:00:1f.2: reg 0x14: [io  0x20ec-0x20ef]
pci 0000:00:1f.2: reg 0x18: [io  0x20c0-0x20c7]
pci 0000:00:1f.2: reg 0x1c: [io  0x20e8-0x20eb]
pci 0000:00:1f.2: reg 0x20: [io  0x20a0-0x20af]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io  0x2000-0x201f]
pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
pci 0000:01:00.0: reg 0x18: [mem 0x90100000-0x90100fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0x90000000-0x9000ffff 64bit pref]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x90100000-0x901fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xf0000000] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: Enabled 3 GPEs in block 00 to 1F
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x7f525000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f5bd000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f660000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f6f3000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f700000-0x7fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf0000000-0xf3ffffff] could not be reserved
system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x0500-0x053f] has been reserved
system 00:02: [io  0x0400-0x047f] could not be reserved
system 00:02: [io  0x0680-0x06ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1f.0: BAR 13: [io  0x0400-0x047f] has bogus alignment
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.2: BAR 14: assigned [mem 0x90300000-0x904fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x90500000-0x906fffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0x90700000-0x908fffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x90900000-0x90afffff 64bit pref]
pci 0000:00:1c.2: BAR 13: assigned [io  0x3000-0x3fff]
pci 0000:00:1c.3: BAR 13: assigned [io  0x4000-0x4fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x90120000-0x9013ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x90100000-0x901fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.2:   bridge window [mem 0x90300000-0x904fffff]
pci 0000:00:1c.2:   bridge window [mem 0x90500000-0x906fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.3:   bridge window [mem 0x90700000-0x908fffff]
pci 0000:00:1c.3:   bridge window [mem 0x90900000-0x90afffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:00: resource 9 [mem 0x80000000-0xf0000000]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x90100000-0x901fffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0x90300000-0x904fffff]
pci_bus 0000:02: resource 2 [mem 0x90500000-0x906fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0x90700000-0x908fffff]
pci_bus 0000:03: resource 2 [mem 0x90900000-0x90afffff 64bit pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000e0000-0x000effff]
pci_bus 0000:04: resource 8 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:04: resource 9 [mem 0x80000000-0xf0000000]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28320K (ffff8800348a0000 - ffff880036448000)
microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x208
microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x208
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1414359764.484:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 3970
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0x80000000, mapped to 0xffffc90008400000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x10
intel_idle: v0.4 model 0x1C
intel_idle: lapic_timer_reliable_states 0x2
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945G Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata2: port disabled--ignoring
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19
ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0x902c4000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-23-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-23-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-23-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-23-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-23-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: d120c47c14beb62ead6703d41712cc110575d297'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 2:891:753
ata_link link4: hash matches
 link4: hash matches
tty ttyS4: hash matches
rtc_cmos 00:01: setting system clock to 2014-10-26 21:42:44 UTC (1414359764)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata3.01: NODEV after polling detection
ata3.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100
ata4.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
ata4.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:0:0:0: Direct-Access     ATA      WDC WD800JD-75MS 1E04 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 3:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1360K (ffffffff81d2e000 - ffffffff81e82000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 448K (ffff880001790000 - ffff880001800000)
Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
systemd-udevd[119]: starting version 208
random: systemd-udevd urandom read with 13 bits of entropy available
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:01:00.0: irq 43 for MSI/MSI-X
r8169 0000:01:00.0 eth0: RTL8102e at 0xffffc9000037e000, 00:1c:c0:5e:84:34, XID 04a00000 IRQ 43
[drm] Memory usable by graphics device = 256M
[drm] Replacing VGA console driver
checking generic (80000000 130000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
usb 3-1: new low-speed USB device number 2 using uhci_hcd
Raw EDID:
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff fc
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 3-1: New USB device found, idVendor=045e, idProduct=00db
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Natural® Ergonomic Keyboard 4000
usb 3-1: Manufacturer: Microsoft
tsc: Refined TSC clocksource calibration: 1596.115 MHz
usb 3-2: new low-speed USB device number 3 using uhci_hcd
usb 3-2: New USB device found, idVendor=045e, idProduct=0039
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Microsoft IntelliMouse® Optical
usb 3-2: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft IntelliMouse® Optical as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:045E:0039.0003/input/input5
hid-generic 0003:045E:0039.0003: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:1d.1-2/input0
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:045E:00DB.0001/input/input6
microsoft 0003:045E:00DB.0001: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.1-1/input0
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:045E:00DB.0002/input/input7
microsoft 0003:045E:00DB.0002: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.1-1/input1
Switched to clocksource tsc
floppy0: no floppy controllers found
Raw EDID:
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Raw EDID:
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00
Raw EDID:
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Raw EDID:
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 	00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i915 0000:00:02.0: VGA-1: EDID block 0 invalid.
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
random: nonblocking pool is initialized
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 46 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (204) killed by TERM signal
systemd-udevd[331]: starting version 208
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
lp0: using parport0 (interrupt-driven).
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000428-0x0000000000000429 (\GPE0) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x000000000000050c-0x000000000000050f (\IGPO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
gpio_ich: GPIO from 206 to 255 on gpio_ich
audit: type=1400 audit(1414359785.602:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=508 comm="apparmor_parser"
audit: type=1400 audit(1414359785.602:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=508 comm="apparmor_parser"
audit: type=1400 audit(1414359785.602:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=508 comm="apparmor_parser"
audit: type=1400 audit(1414359785.602:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=477 comm="apparmor_parser"
audit: type=1400 audit(1414359785.606:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser"
audit: type=1400 audit(1414359785.606:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit: type=1400 audit(1414359785.778:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=491 comm="apparmor_parser"
audit: type=1400 audit(1414359785.778:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=491 comm="apparmor_parser"
audit: type=1400 audit(1414359785.778:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=491 comm="apparmor_parser"
audit: type=1400 audit(1414359785.806:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=532 comm="apparmor_parser"
sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D2:    mono: mono_out=0x0
sound hdaudioC0D2:    inputs:
sound hdaudioC0D2:      Front Mic=0x19
sound hdaudioC0D2:      Rear Mic=0x18
sound hdaudioC0D2:      Line=0x1a
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
floppy0: no floppy controllers found
work still pending
init: failsafe main process (587) killed by TERM signal
init: mountall main process (228) terminated with status 2
systemd-logind[966]: New seat seat0.
systemd-logind[966]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[966]: Watching system buttons on /dev/input/event0 (Sleep Button)
r8169 0000:01:00.0 eth0: link down
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: alsa-restore main process (1161) terminated with status 99
r8169 0000:01:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-logind[966]: Failed to start unit user@106.service: Unknown unit: user@106.service
systemd-logind[966]: Failed to start user service: Unknown unit: user@106.service
systemd-logind[966]: New session c1 of user lightdm.
systemd-logind[966]: Linked /tmp/.X11-unix/X0 to /run/user/106/X11-display.
systemd-logind[966]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[966]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[966]: New session c2 of user jaromir.
systemd-logind[966]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: ST_FIRST: !(DRQ|ERR|DF)
sr 2:0:0:0: CDB: 
Get event status notification: 4a 01 00 00 10 00 00 00 08 00
ata3.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
         res 00/01:01:01:14:eb/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata3: soft resetting link
ata3.01: NODEV after polling detection
ata3.00: configured for UDMA/100
ata3: EH complete
perf interrupt took too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5018 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
systemd-logind[966]: New session c3 of user lightdm.
systemd-logind[966]: New session c4 of user lightdm.
systemd-logind[966]: New session c5 of user lightdm.
systemd-logind[966]: New session c6 of user lightdm.
systemd-logind[966]: New session c7 of user lightdm.
perf interrupt took too long (10038 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
systemd-logind[966]: New session c8 of user lightdm.

Return To Western Digital WD800JD-75MS System Information